Reminder: After updating, the message “The Wi-Fi/Bluetooth unit has malfunctioned.” appears.

Share

I noticed that a couple of readers missed to notice and read this important note from Sony regarding the A1 2.01 firmware update. So I thought it’s best to highlight it to make sure you don’t waste time looking for a solution:

With the latest firmware, the following message will be displayed if a hardware error related to the network function is detected when the Wi-Fi or Bluetooth function is turned on. (Displayed only when a hardware problem is detected, not a software problem)
You can continue shooting by pressing OK, but you will not be able to use the network functions, so we recommend that you take the camera in for inspection as soon as possible.

Share
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases

**This post contains affiliate links to eBay and I will be compensated if you make a purchase after clicking through my links. As an eBay Associate I earn from qualifying purchases
Back To Top