First Sony F3 video sample!!!

Share


compulsion – teaser from Jason Wingrove on Vimeo.

Finally we have the very frist Sony F3 video sample. This is of interest for us Alpha/NEX users becuase the F3 uses the same sensor of the E-mount NXcam. The main difference is the codec. The F3 uses ExmorHD at 34Mbit/s and the NXcam AVCHD at 24Mbit/s.

“This is a teaser for a short shot entirely with the Sony PMW-F3. It will form part of Sea Pool. vimeo.com/​channels/​seapool A documentary currently in production on the Australian ocean pool culture in Sydney and shot early morning at North Narrabeen on Sydney’s northern beaches.
Lenses were [shoplink 4596]Zeiss 40mm UltraPrime[/shoplink], Super Speeds, & 135mm prime.
I’ve done a subtle preliminary grade using Red Giant’s Magic Bullet Looks but we can already see the footage has great possibilities in the grade.
For more on the shoot & our experiences with the camera go to fxguide.com and listen to our podcast, Red Centre. fxguide.com/​redcentre
The full version can be seen at Sony live events in Australia & NZ very soon, go to sony.com.au/​pmwf3 to register. Thanks for dropping by.
Director/Cinematographer: Jason Wingrove
Cinematographer: Tom Gleeson gleeson.net.au/
Talent: Bel Delia deliafilms.com.au/
Sound: Mario Pellegrino
Music: Jozef Vilk

Jason Wingrove
Freelance TVC /Film Director, Cinematographer.
jasonwingrove.com
twitter.com/​wingrove “

Share
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases

**This post contains affiliate links to eBay and I will be compensated if you make a purchase after clicking through my links. As an eBay Associate I earn from qualifying purchases
Back To Top

Looks like your ad blocker is on.

×

We rely on ads to keep creating quality content for you to enjoy for free.

Please support our site by disabling your ad blocker.

Continue without supporting us

Choose your Ad Blocker

  • Adblock Plus
  • Adblock
  • Adguard
  • Ad Remover
  • Brave
  • Ghostery
  • uBlock Origin
  • uBlock
  • UltraBlock
  • Other
  1. In the extension bar, click the AdBlock Plus icon
  2. Click the large blue toggle for this website
  3. Click refresh
  1. In the extension bar, click the AdBlock icon
  2. Under "Pause on this site" click "Always"
  1. In the extension bar, click on the Adguard icon
  2. Click on the large green toggle for this website
  1. In the extension bar, click on the Ad Remover icon
  2. Click "Disable on This Website"
  1. In the extension bar, click on the orange lion icon
  2. Click the toggle on the top right, shifting from "Up" to "Down"
  1. In the extension bar, click on the Ghostery icon
  2. Click the "Anti-Tracking" shield so it says "Off"
  3. Click the "Ad-Blocking" stop sign so it says "Off"
  4. Refresh the page
  1. In the extension bar, click on the uBlock Origin icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the uBlock icon
  2. Click on the big, blue power button
  3. Refresh the page
  1. In the extension bar, click on the UltraBlock icon
  2. Check the "Disable UltraBlock" checkbox
  1. Please disable your Ad Blocker
  2. Disable any DNS blocking tools such as AdGuardDNS or NextDNS
  3. Disable any privacy or tracking protection extensions such as Firefox Enhanced Tracking Protection or DuckDuckGo Privacy.

If the prompt is still appearing, please disable any tools or services you are using that block internet ads (e.g. DNS Servers, tracking protection or privacy extensions).